Oomatshini bokucubungula iifestile kunye namakhethini eludongeni

Amava okuvelisa eminyaka engama-23
imveliso

Umatshini wokusila we-Slot Milling Machine we-CNC Aluminium oneentloko ezininzi i-MAFM-830

Umatshini wokusila we-CNC Aluminium formwork oneentloko ezininzi Umfanekiso obonisiweyo
  • Umatshini wokusila we-Slot Milling we-CNC Aluminium formwork onentloko ezininzi 1
  • I-CNC Aluminium formwork multi-head Slot Milling Machine 2
  • I-CNC Aluminium formwork multi-head Slot Milling Machine 3
  • I-CNC Aluminium formwork enentloko ezininzi i-Slot Milling Machine 4

Inkcazo emfutshane:

  1. Lo matshini ufanelekile kuzo zonke iintlobo zePaneli yeFomwork yeAluminiyamukugaya ii-slots.
  2. Isixhobo ngasinye sokusika ii-slots sixhotyiswe ngenkqubo yokubonisa umlinganiselo wedijithali, okulula ngakumbi ukuseta indawo phakathi kwee-slots nganye.
  3. Ububanzi bokugaya buyi-36mm, 40mm kunye ne-42mm ngokuzithandela.

Iinkcukacha zeMveliso

Iithegi zeMveliso

CGMA&CBS CNC ALUMINIUM FORMWORK MULTI-HEAD slot MILLING MACHINE MAFM-830

Intshayelelo yeMveliso

1. Isixhobo sokubopha senziwe ngokwemilo eyahlukileyo yesixhobo sokusebenza. Singagaya ubude beeprofayili ze-L, U ukusuka kwi-100 ukuya kwi-600mm. Isixhobo seprofayili esingekho semgangathweni singenziwa ngokwezifiso.
2. Itheyibhile yokusebenza eyilwe ngokukodwa yenza umatshini ufaneleke kwiphaneli endala ye-aluminium formwork kunye nephaneli entsha ye-formwork.
3.Iintloko zokugaya zeslots nganye zixhotyiswe ngezibonelelo zohlengahlengiso ezintle, zilula kakhulu ukusebenza.
4. Umatshini ungaxhotyiswa ngeentloko zokugaya ezi-6, 7 okanye 8 ngokweemfuno, umgama omncinci phakathi kweentloko ezimbini zokugaya yi-150+/- 0.1mm, intloko nganye yokugaya ingasebenza yodwa.
5. I-slot milling shaft nganye ixhotyiswe ngesikrini sokulinganisa sedijithali, esibonisa umgama phakathi kwe-slots nganye lula ukuwubeka.
6. Imodeli yokondla yamkela inkqubo yokuqhuba ye-servo, kulula ukuyiseta ngokwemodeli yokusebenza eyahlukileyo.
7. Kukho iitafile ezimbini zokusebenza zokulayisha iiphaneli ezimbini ngexesha elinye,
8. Ububanzi bokugaya buyi-36mm, 40mm kunye ne-42mm ngokuzithandela.

Ipharamitha yoBugcisa obuPhambili

Hayi.

Umxholo

Ipharamitha

1

 I-Voltage yokufaka 380/415V, 50Hz

2

 Amandla alinganisiweyo 2.2KWx8

3

 Ubude bephaneli obuphezulu 3000mm

4

 Isantya esiphezulu sokusebenza 4500mm/ngomzuzu

5

 Ukuchaneka kokusila ± 0.15mm/300mm

6

 Ukuchaneka kokubeka okuphindaphindiweyo ± 0.10mm/300mm

7

 Ububanzi bokugaya 36mm, 40mm, 42mm

8

 Isantya somngxuma oyintloko 9000r/ngomzuzu

9

 Ubukhulu obupheleleyo 4500 x 2300 x 1700mm

 

Iinkcukacha zeMveliso

umatshini wokugaya i-slot-slot-mafm-830-aluminium-formwork-cnc-multi-head (2)
umatshini wokugaya i-slot-slot-mafm-830-aluminium-formwork-cnc-multi-head (3)
umatshini wokugaya i-mafm-830-aluminium-formwork-cnc-multi-head-slot-milling
  • Ngaphambili:
  • Okulandelayo:

    • IMVELISO EZINXULUMENEYO